RESEARCH
Read through our resources and make a study plan. If you have one already, see where you stand by practicing with the real deal.
STUDY
Invest as much time here. It’s recommened to go over one book before you move on to practicing. Make sure you get hands on experience.
PASS
Schedule the exam and make sure you are within the 30 days free updates to maximize your chances. When you have the exam date confirmed focus on practicing.
Pass D-AA-OP-23 c
line con 0
line vty 0 4
login local
transport input ssh
line vty 5 15
login local
transport input ssh
NEW QUESTION: 4
in Which way does a spine and-leaf architecture allow for scalability in a network when additional access ports are required?
A. A spine switch and a leaf switch can be added with redundant connections between them
B. A leaf switch can be added with a single connection to a core spine switch.
C. A leaf switch can be added with connections to every spine switch
D. A spine switch can be added with at least 40 GB uplinks
Answer: C
Explanation:
Spine-leaf architecture is typically deployed as two layers: spines (such as an aggregation layer), and leaves (such as an access layer). Spine-leaf topologies provide high-bandwidth, low-latency, nonblocking server-to-server connectivity.
Leaf (aggregation) switches are what provide devices access to the fabric (the network of spine and leaf switches) and are typically deployed at the top of the rack. Generally, devices connect to the leaf switches. Devices can include servers, Layer 4-7 services (firewalls and load balancers), and WAN or Internet routers. Leaf switches do not connect to other leaf switches. In spine-and-leaf architecture, every leaf should connect to every spine in a full mesh.
Spine (aggregation) switches are used to connect to all leaf switches and are typically deployed at the end or middle of the row. Spine switches do not connect to other spine switches.
Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guide-c07-733228.html
Get 100% Real Exam Questions, Accurate & Verified Answers As Seen in the Real Exam!
30 Days Free Updates, Instant Download!
c
line con 0
line vty 0 4
login local
transport input ssh
line vty 5 15
login local
transport input ssh
NEW QUESTION: 4
in Which way does a spine and-leaf architecture allow for scalability in a network when additional access ports are required?
A. A spine switch and a leaf switch can be added with redundant connections between them
B. A leaf switch can be added with a single connection to a core spine switch.
C. A leaf switch can be added with connections to every spine switch
D. A spine switch can be added with at least 40 GB uplinks
Answer: C
Explanation:
Spine-leaf architecture is typically deployed as two layers: spines (such as an aggregation layer), and leaves (such as an access layer). Spine-leaf topologies provide high-bandwidth, low-latency, nonblocking server-to-server connectivity.
Leaf (aggregation) switches are what provide devices access to the fabric (the network of spine and leaf switches) and are typically deployed at the top of the rack. Generally, devices connect to the leaf switches. Devices can include servers, Layer 4-7 services (firewalls and load balancers), and WAN or Internet routers. Leaf switches do not connect to other leaf switches. In spine-and-leaf architecture, every leaf should connect to every spine in a full mesh.
Spine (aggregation) switches are used to connect to all leaf switches and are typically deployed at the end or middle of the row. Spine switches do not connect to other spine switches.
Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guide-c07-733228.html
PDF&VCE with 531 Questions and Answers
VCE Simulator Included
30 Days Free Updates | 24×7 Support | Verified by Experts
c
line con 0
line vty 0 4
login local
transport input ssh
line vty 5 15
login local
transport input ssh
NEW QUESTION: 4
in Which way does a spine and-leaf architecture allow for scalability in a network when additional access ports are required?
A. A spine switch and a leaf switch can be added with redundant connections between them
B. A leaf switch can be added with a single connection to a core spine switch.
C. A leaf switch can be added with connections to every spine switch
D. A spine switch can be added with at least 40 GB uplinks
Answer: C
Explanation:
Spine-leaf architecture is typically deployed as two layers: spines (such as an aggregation layer), and leaves (such as an access layer). Spine-leaf topologies provide high-bandwidth, low-latency, nonblocking server-to-server connectivity.
Leaf (aggregation) switches are what provide devices access to the fabric (the network of spine and leaf switches) and are typically deployed at the top of the rack. Generally, devices connect to the leaf switches. Devices can include servers, Layer 4-7 services (firewalls and load balancers), and WAN or Internet routers. Leaf switches do not connect to other leaf switches. In spine-and-leaf architecture, every leaf should connect to every spine in a full mesh.
Spine (aggregation) switches are used to connect to all leaf switches and are typically deployed at the end or middle of the row. Spine switches do not connect to other spine switches.
Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guide-c07-733228.html
Practice Questions
in Which way does a spine and-leaf architecture allow for scalability in a network when additional access ports are required?
A. A spine switch and a leaf switch can be added with redundant connections between them
B. A leaf switch can be added with a single connection to a core spine switch.
C. A leaf switch can be added with connections to every spine switch
D. A spine switch can be added with at least 40 GB uplinks
Answer: C
Explanation:
Spine-leaf architecture is typically deployed as two layers: spines (such as an aggregation layer), and leaves (such as an access layer). Spine-leaf topologies provide high-bandwidth, low-latency, nonblocking server-to-server connectivity.
Leaf (aggregation) switches are what provide devices access to the fabric (the network of spine and leaf switches) and are typically deployed at the top of the rack. Generally, devices connect to the leaf switches. Devices can include servers, Layer 4-7 services (firewalls and load balancers), and WAN or Internet routers. Leaf switches do not connect to other leaf switches. In spine-and-leaf architecture, every leaf should connect to every spine in a full mesh.
Spine (aggregation) switches are used to connect to all leaf switches and are typically deployed at the end or middle of the row. Spine switches do not connect to other spine switches.
Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guide-c07-733228.html
As promised to our users we are making more content available. Take some time and see where you stand with our Free c
line con 0
line vty 0 4
login local
transport input ssh
line vty 5 15
login local
transport input ssh
NEW QUESTION: 4
in Which way does a spine and-leaf architecture allow for scalability in a network when additional access ports are required?
A. A spine switch and a leaf switch can be added with redundant connections between them
B. A leaf switch can be added with a single connection to a core spine switch.
C. A leaf switch can be added with connections to every spine switch
D. A spine switch can be added with at least 40 GB uplinks
Answer: C
Explanation:
Spine-leaf architecture is typically deployed as two layers: spines (such as an aggregation layer), and leaves (such as an access layer). Spine-leaf topologies provide high-bandwidth, low-latency, nonblocking server-to-server connectivity.
Leaf (aggregation) switches are what provide devices access to the fabric (the network of spine and leaf switches) and are typically deployed at the top of the rack. Generally, devices connect to the leaf switches. Devices can include servers, Layer 4-7 services (firewalls and load balancers), and WAN or Internet routers. Leaf switches do not connect to other leaf switches. In spine-and-leaf architecture, every leaf should connect to every spine in a full mesh.
Spine (aggregation) switches are used to connect to all leaf switches and are typically deployed at the end or middle of the row. Spine switches do not connect to other spine switches.
Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guide-c07-733228.html
line con 0
line vty 0 4
login local
transport input ssh
line vty 5 15
login local
transport input ssh
NEW QUESTION: 4
in Which way does a spine and-leaf architecture allow for scalability in a network when additional access ports are required?
A. A spine switch and a leaf switch can be added with redundant connections between them
B. A leaf switch can be added with a single connection to a core spine switch.
C. A leaf switch can be added with connections to every spine switch
D. A spine switch can be added with at least 40 GB uplinks
Answer: C
Explanation:
Spine-leaf architecture is typically deployed as two layers: spines (such as an aggregation layer), and leaves (such as an access layer). Spine-leaf topologies provide high-bandwidth, low-latency, nonblocking server-to-server connectivity.
Leaf (aggregation) switches are what provide devices access to the fabric (the network of spine and leaf switches) and are typically deployed at the top of the rack. Generally, devices connect to the leaf switches. Devices can include servers, Layer 4-7 services (firewalls and load balancers), and WAN or Internet routers. Leaf switches do not connect to other leaf switches. In spine-and-leaf architecture, every leaf should connect to every spine in a full mesh.
Spine (aggregation) switches are used to connect to all leaf switches and are typically deployed at the end or middle of the row. Spine switches do not connect to other spine switches.
Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guide-c07-733228.html
Free D-AA-OP-23
- LEED-AP-BD-C Exam Dumps
- H19-411_V1.0 Dumps Discount
- Learning UiPath-SAIv1 Materials
- C_HCMP_2311 Reliable Braindumps Pdf
- Data-Engineer-Associate-KR Valid Test Review
- SnowPro-Core Practical Information
- C_S4PPM_2021 Exam Sims
- Practice Test ADA-C01 Pdf
- Reliable CIS-RCI Study Guide
- H14-231_V1.0 Test Question
- Latest SC-100 Test Report
- Online 500-420 Tests
- New HPE7-A07 Exam Testking
- C_THR94_2311 Updated Dumps
- CCFH-202 Authentic Exam Questions
- Reliable HPE2-B07 Exam Cost
- Reliable EPM-DEF Learning Materials
- CWAP-404 Original Questions
- C-S4CWM-2308 Reliable Exam Pass4sure
- New D-PDD-OE-23 Dumps Book
- Exam 2V0-41.20 Preparation
- 1z0-1119-1 Exam Pattern
- Valid C-SACP-2321 Test Duration
- Test C-ARSUM-2202 Study Guide
line con 0
line vty 0 4
login local
transport input ssh
line vty 5 15
login local
transport input ssh
NEW QUESTION: 4
in Which way does a spine and-leaf architecture allow for scalability in a network when additional access ports are required?
A. A spine switch and a leaf switch can be added with redundant connections between them
B. A leaf switch can be added with a single connection to a core spine switch.
C. A leaf switch can be added with connections to every spine switch
D. A spine switch can be added with at least 40 GB uplinks
Answer: C
Explanation:
Spine-leaf architecture is typically deployed as two layers: spines (such as an aggregation layer), and leaves (such as an access layer). Spine-leaf topologies provide high-bandwidth, low-latency, nonblocking server-to-server connectivity.
Leaf (aggregation) switches are what provide devices access to the fabric (the network of spine and leaf switches) and are typically deployed at the top of the rack. Generally, devices connect to the leaf switches. Devices can include servers, Layer 4-7 services (firewalls and load balancers), and WAN or Internet routers. Leaf switches do not connect to other leaf switches. In spine-and-leaf architecture, every leaf should connect to every spine in a full mesh.
Spine (aggregation) switches are used to connect to all leaf switches and are typically deployed at the end or middle of the row. Spine switches do not connect to other spine switches.
Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guide-c07-733228.html
line con 0
line vty 0 4
login local
transport input ssh
line vty 5 15
login local
transport input ssh
NEW QUESTION: 4
in Which way does a spine and-leaf architecture allow for scalability in a network when additional access ports are required?
A. A spine switch and a leaf switch can be added with redundant connections between them
B. A leaf switch can be added with a single connection to a core spine switch.
C. A leaf switch can be added with connections to every spine switch
D. A spine switch can be added with at least 40 GB uplinks
Answer: C
Explanation:
Spine-leaf architecture is typically deployed as two layers: spines (such as an aggregation layer), and leaves (such as an access layer). Spine-leaf topologies provide high-bandwidth, low-latency, nonblocking server-to-server connectivity.
Leaf (aggregation) switches are what provide devices access to the fabric (the network of spine and leaf switches) and are typically deployed at the top of the rack. Generally, devices connect to the leaf switches. Devices can include servers, Layer 4-7 services (firewalls and load balancers), and WAN or Internet routers. Leaf switches do not connect to other leaf switches. In spine-and-leaf architecture, every leaf should connect to every spine in a full mesh.
Spine (aggregation) switches are used to connect to all leaf switches and are typically deployed at the end or middle of the row. Spine switches do not connect to other spine switches.
Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guide-c07-733228.html
EMC D-AA-OP-23 Printable PDF It's not just that you get the dumps, and you will succeed, EMC D-AA-OP-23 Printable PDF Take a Look at the Demo Version Before You Buy Benefit from customized Testing Engine with accurate questions and answers from your desired exam, Our D-AA-OP-23 exam braindumps are famous for the advantage of high-efficiency and high-effective, So if you pay much attention to our D-AA-OP-23 exam torrent we guarantee you 100% pass D-AA-OP-23 exam at first shot.
Identify corporate cultural-fit factors, If a vendor or a group of vendors or 500-430 Exam Simulator Free worse yet the Department of Homeland Security tells you that they have a way of measuring security in software automatically, they are making stuff up.
Andrews is an associate professor in the Department of Electrical and Dumps C_S4CS_2308 Guide Computer Engineering at the University of Texas at Austin, where he is the director of the Wireless Networking and Communications Group.
It turned out to be a friend, but now it's D-AA-OP-23 Printable PDF no longer a friend, This self-transformation can only be achieved through communication, Sharing Music and Video, Mandy studied at D-AA-OP-23 Printable PDF Harvard Business School and is a fellow of the London Metropolitan Business School.
Practical Data Science with Hadoop® and Spark is your complete D-AA-OP-23 Printable PDF guide to doing just that, Subnetting a Subnet, Introducing Online Image Processor, What an honor to receive that.
Free PDF Quiz EMC - Pass-Sure D-AA-OP-23 - Dell Data Scientist Advanced Analytics Optimize 2023 Printable PDF
Even the stock market has recovered, How to draw antialiased points, D-AA-OP-23 Printable PDF lines, and polygons, You can add shapes from the templates available in Pages and then customize them for your specific use.
I'm talking about drones, of course, Token Ring works D-AA-OP-23 Printable PDF very differently from Ethernet, It's not just that you get the dumps, and you will succeed,Take a Look at the Demo Version Before You Buy Benefit https://vcetorrent.examtorrent.com/D-AA-OP-23-prep4sure-dumps.html from customized Testing Engine with accurate questions and answers from your desired exam.
Our D-AA-OP-23 exam braindumps are famous for the advantage of high-efficiency and high-effective, So if you pay much attention to our D-AA-OP-23 exam torrent we guarantee you 100% pass D-AA-OP-23 exam at first shot.
If you have any question that you don't understand, Practice C_S4CWM_2308 Test Online just contat us and we will give you the most professional advice immediately, And our website has already became a famous brand in the market because of our reliable D-AA-OP-23 exam questions.
Millions of interested professionals can touch the destination of success in exams by Pulsarhealthcare, The content of our D-AA-OP-23 study guide is very easy for you to understand for all the levels of the candidates.
Valid D-AA-OP-23 Printable PDF & Leading Offer in Qualification Exams & Hot D-AA-OP-23 Practice Test Online
The most convenient and point is that no limitation, The Guarantee https://testking.pdf4test.com/D-AA-OP-23-actual-dumps.html Claim request should be submitted within 7 days after exam failure otherwise Team reserves the right of final decision.
Try temporarily disabling your User Account Control (UAC), firewall, and anti-virus H19-432_V1.0 Flexible Testing Engine applications, If you would like to inquire about licenses for training employees or students, please see the Volume Solutions page of our website.
And you can immediately download our D-AA-OP-23 exam guide files as we provide downloading link and also you can log in our site with the account and password we provide, and then download any time.
Some people may wonder whether D-AA-OP-23 valid practice pdf outdated, Our company is a well-known multinational company, has its own complete sales system and after-sales service worldwide.
As more Dell Data Scientist Advanced Analytics Optimize 2023 free study demo come D-AA-OP-23 Printable PDF into appearance, some products charge for extra update or service.
NEW QUESTION: 1
SIMULATION
Click to expand each objective. To connect to the Azure portal, type https://portal.azure.com in the browser address bar.
When you are finished performing all the tasks, click the 'Next' button.
Note that you cannot return to the lab once you click the 'Next' button. Scoring occur in the background while you complete the rest of the exam.
Overview
The following section of the exam is a lab. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
To start the lab
You may start the lab by clicking the Next button.
Your company plans to store several documents on a public website.
You need to create a container named bios that will host the documents in the storagelod8322489 storage account. The solution must ensure anonymous access and must ensure that users can browse folders in the container.
What should you do from the Azure portal?
Answer:
Explanation:
See explanation below.
Explanation
Azure portal create public container
To create a container in the Azure portal, follow these steps:
Step 1. Navigate to your new storage account in the Azure portal.
Step 2. In the left menu for the storage account, scroll to the lob service section, then select Blobs.
Select the + Container button.
Type a name for your new container: bios
Set the level of public access to the container: Select anonymous access.
Step 3. Select OK to create the container.
References:
https://docs.microsoft.com/en-us/azure/storage/blobs/storage-quickstart-blobs-portal
NEW QUESTION: 2
You have been asked by a recently formed DevOps team to qualify the principles for Continuous Delivery.
Which method falls outside the practice of continuous delivery?
A. Deploy smaller code segments more often
B. Automate the delivery pipeline
C. Tie code releases to operational constraints
D. Use component-based architecture
Answer: B
NEW QUESTION: 3
Hotspot Questions
Select three options which are security issues with the current configuration of SwitchA . (Choose three.)
A. privilege mode is protected with an unencrypted password
B. inappropriate wording in banner message
C. both the username and password are weak
D. virtual terminal lines are protected only by a password requirement
E. telnet connections can be used to remotely manage the switch
F. cisco user will be granted privilege level 15 by default
Answer: A,B,C
Explanation:
SWITCH A CONFIGURATION
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login
c
line con 0
line vty 0 4
login local
transport input ssh
line vty 5 15
login local
transport input ssh
NEW QUESTION: 4
in Which way does a spine and-leaf architecture allow for scalability in a network when additional access ports are required?
A. A spine switch and a leaf switch can be added with redundant connections between them
B. A leaf switch can be added with a single connection to a core spine switch.
C. A leaf switch can be added with connections to every spine switch
D. A spine switch can be added with at least 40 GB uplinks
Answer: C
Explanation:
Spine-leaf architecture is typically deployed as two layers: spines (such as an aggregation layer), and leaves (such as an access layer). Spine-leaf topologies provide high-bandwidth, low-latency, nonblocking server-to-server connectivity.
Leaf (aggregation) switches are what provide devices access to the fabric (the network of spine and leaf switches) and are typically deployed at the top of the rack. Generally, devices connect to the leaf switches. Devices can include servers, Layer 4-7 services (firewalls and load balancers), and WAN or Internet routers. Leaf switches do not connect to other leaf switches. In spine-and-leaf architecture, every leaf should connect to every spine in a full mesh.
Spine (aggregation) switches are used to connect to all leaf switches and are typically deployed at the end or middle of the row. Spine switches do not connect to other spine switches.
Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guide-c07-733228.html
Q: What should I expect from studying the c
line con 0
line vty 0 4
login local
transport input ssh
line vty 5 15
login local
transport input ssh
NEW QUESTION: 4
in Which way does a spine and-leaf architecture allow for scalability in a network when additional access ports are required?
A. A spine switch and a leaf switch can be added with redundant connections between them
B. A leaf switch can be added with a single connection to a core spine switch.
C. A leaf switch can be added with connections to every spine switch
D. A spine switch can be added with at least 40 GB uplinks
Answer: C
Explanation:
Spine-leaf architecture is typically deployed as two layers: spines (such as an aggregation layer), and leaves (such as an access layer). Spine-leaf topologies provide high-bandwidth, low-latency, nonblocking server-to-server connectivity.
Leaf (aggregation) switches are what provide devices access to the fabric (the network of spine and leaf switches) and are typically deployed at the top of the rack. Generally, devices connect to the leaf switches. Devices can include servers, Layer 4-7 services (firewalls and load balancers), and WAN or Internet routers. Leaf switches do not connect to other leaf switches. In spine-and-leaf architecture, every leaf should connect to every spine in a full mesh.
Spine (aggregation) switches are used to connect to all leaf switches and are typically deployed at the end or middle of the row. Spine switches do not connect to other spine switches.
Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guide-c07-733228.html
A: You will be able to get a first hand feeling on how the c
line con 0
line vty 0 4
login local
transport input ssh
line vty 5 15
login local
transport input ssh
NEW QUESTION: 4
in Which way does a spine and-leaf architecture allow for scalability in a network when additional access ports are required?
A. A spine switch and a leaf switch can be added with redundant connections between them
B. A leaf switch can be added with a single connection to a core spine switch.
C. A leaf switch can be added with connections to every spine switch
D. A spine switch can be added with at least 40 GB uplinks
Answer: C
Explanation:
Spine-leaf architecture is typically deployed as two layers: spines (such as an aggregation layer), and leaves (such as an access layer). Spine-leaf topologies provide high-bandwidth, low-latency, nonblocking server-to-server connectivity.
Leaf (aggregation) switches are what provide devices access to the fabric (the network of spine and leaf switches) and are typically deployed at the top of the rack. Generally, devices connect to the leaf switches. Devices can include servers, Layer 4-7 services (firewalls and load balancers), and WAN or Internet routers. Leaf switches do not connect to other leaf switches. In spine-and-leaf architecture, every leaf should connect to every spine in a full mesh.
Spine (aggregation) switches are used to connect to all leaf switches and are typically deployed at the end or middle of the row. Spine switches do not connect to other spine switches.
Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guide-c07-733228.html
Q: Will the Premium c
line con 0
line vty 0 4
login local
transport input ssh
line vty 5 15
login local
transport input ssh
NEW QUESTION: 4
in Which way does a spine and-leaf architecture allow for scalability in a network when additional access ports are required?
A. A spine switch and a leaf switch can be added with redundant connections between them
B. A leaf switch can be added with a single connection to a core spine switch.
C. A leaf switch can be added with connections to every spine switch
D. A spine switch can be added with at least 40 GB uplinks
Answer: C
Explanation:
Spine-leaf architecture is typically deployed as two layers: spines (such as an aggregation layer), and leaves (such as an access layer). Spine-leaf topologies provide high-bandwidth, low-latency, nonblocking server-to-server connectivity.
Leaf (aggregation) switches are what provide devices access to the fabric (the network of spine and leaf switches) and are typically deployed at the top of the rack. Generally, devices connect to the leaf switches. Devices can include servers, Layer 4-7 services (firewalls and load balancers), and WAN or Internet routers. Leaf switches do not connect to other leaf switches. In spine-and-leaf architecture, every leaf should connect to every spine in a full mesh.
Spine (aggregation) switches are used to connect to all leaf switches and are typically deployed at the end or middle of the row. Spine switches do not connect to other spine switches.
Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guide-c07-733228.html
A: No one can guarantee you will pass, this is only up to you. We provide you with the most updated study materials to facilitate your success but at the end of the of it all, you have to pass the exam.
Q: I am new, should I choose c
line con 0
line vty 0 4
login local
transport input ssh
line vty 5 15
login local
transport input ssh
NEW QUESTION: 4
in Which way does a spine and-leaf architecture allow for scalability in a network when additional access ports are required?
A. A spine switch and a leaf switch can be added with redundant connections between them
B. A leaf switch can be added with a single connection to a core spine switch.
C. A leaf switch can be added with connections to every spine switch
D. A spine switch can be added with at least 40 GB uplinks
Answer: C
Explanation:
Spine-leaf architecture is typically deployed as two layers: spines (such as an aggregation layer), and leaves (such as an access layer). Spine-leaf topologies provide high-bandwidth, low-latency, nonblocking server-to-server connectivity.
Leaf (aggregation) switches are what provide devices access to the fabric (the network of spine and leaf switches) and are typically deployed at the top of the rack. Generally, devices connect to the leaf switches. Devices can include servers, Layer 4-7 services (firewalls and load balancers), and WAN or Internet routers. Leaf switches do not connect to other leaf switches. In spine-and-leaf architecture, every leaf should connect to every spine in a full mesh.
Spine (aggregation) switches are used to connect to all leaf switches and are typically deployed at the end or middle of the row. Spine switches do not connect to other spine switches.
Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guide-c07-733228.html
A: We recommend the c
line con 0
line vty 0 4
login local
transport input ssh
line vty 5 15
login local
transport input ssh
NEW QUESTION: 4
in Which way does a spine and-leaf architecture allow for scalability in a network when additional access ports are required?
A. A spine switch and a leaf switch can be added with redundant connections between them
B. A leaf switch can be added with a single connection to a core spine switch.
C. A leaf switch can be added with connections to every spine switch
D. A spine switch can be added with at least 40 GB uplinks
Answer: C
Explanation:
Spine-leaf architecture is typically deployed as two layers: spines (such as an aggregation layer), and leaves (such as an access layer). Spine-leaf topologies provide high-bandwidth, low-latency, nonblocking server-to-server connectivity.
Leaf (aggregation) switches are what provide devices access to the fabric (the network of spine and leaf switches) and are typically deployed at the top of the rack. Generally, devices connect to the leaf switches. Devices can include servers, Layer 4-7 services (firewalls and load balancers), and WAN or Internet routers. Leaf switches do not connect to other leaf switches. In spine-and-leaf architecture, every leaf should connect to every spine in a full mesh.
Spine (aggregation) switches are used to connect to all leaf switches and are typically deployed at the end or middle of the row. Spine switches do not connect to other spine switches.
Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guide-c07-733228.html
line con 0
line vty 0 4
login local
transport input ssh
line vty 5 15
login local
transport input ssh
NEW QUESTION: 4
in Which way does a spine and-leaf architecture allow for scalability in a network when additional access ports are required?
A. A spine switch and a leaf switch can be added with redundant connections between them
B. A leaf switch can be added with a single connection to a core spine switch.
C. A leaf switch can be added with connections to every spine switch
D. A spine switch can be added with at least 40 GB uplinks
Answer: C
Explanation:
Spine-leaf architecture is typically deployed as two layers: spines (such as an aggregation layer), and leaves (such as an access layer). Spine-leaf topologies provide high-bandwidth, low-latency, nonblocking server-to-server connectivity.
Leaf (aggregation) switches are what provide devices access to the fabric (the network of spine and leaf switches) and are typically deployed at the top of the rack. Generally, devices connect to the leaf switches. Devices can include servers, Layer 4-7 services (firewalls and load balancers), and WAN or Internet routers. Leaf switches do not connect to other leaf switches. In spine-and-leaf architecture, every leaf should connect to every spine in a full mesh.
Spine (aggregation) switches are used to connect to all leaf switches and are typically deployed at the end or middle of the row. Spine switches do not connect to other spine switches.
Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guide-c07-733228.html
line con 0
line vty 0 4
login local
transport input ssh
line vty 5 15
login local
transport input ssh
NEW QUESTION: 4
in Which way does a spine and-leaf architecture allow for scalability in a network when additional access ports are required?
A. A spine switch and a leaf switch can be added with redundant connections between them
B. A leaf switch can be added with a single connection to a core spine switch.
C. A leaf switch can be added with connections to every spine switch
D. A spine switch can be added with at least 40 GB uplinks
Answer: C
Explanation:
Spine-leaf architecture is typically deployed as two layers: spines (such as an aggregation layer), and leaves (such as an access layer). Spine-leaf topologies provide high-bandwidth, low-latency, nonblocking server-to-server connectivity.
Leaf (aggregation) switches are what provide devices access to the fabric (the network of spine and leaf switches) and are typically deployed at the top of the rack. Generally, devices connect to the leaf switches. Devices can include servers, Layer 4-7 services (firewalls and load balancers), and WAN or Internet routers. Leaf switches do not connect to other leaf switches. In spine-and-leaf architecture, every leaf should connect to every spine in a full mesh.
Spine (aggregation) switches are used to connect to all leaf switches and are typically deployed at the end or middle of the row. Spine switches do not connect to other spine switches.
Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guide-c07-733228.html
Q: I would like to know more about the c
line con 0
line vty 0 4
login local
transport input ssh
line vty 5 15
login local
transport input ssh
NEW QUESTION: 4
in Which way does a spine and-leaf architecture allow for scalability in a network when additional access ports are required?
A. A spine switch and a leaf switch can be added with redundant connections between them
B. A leaf switch can be added with a single connection to a core spine switch.
C. A leaf switch can be added with connections to every spine switch
D. A spine switch can be added with at least 40 GB uplinks
Answer: C
Explanation:
Spine-leaf architecture is typically deployed as two layers: spines (such as an aggregation layer), and leaves (such as an access layer). Spine-leaf topologies provide high-bandwidth, low-latency, nonblocking server-to-server connectivity.
Leaf (aggregation) switches are what provide devices access to the fabric (the network of spine and leaf switches) and are typically deployed at the top of the rack. Generally, devices connect to the leaf switches. Devices can include servers, Layer 4-7 services (firewalls and load balancers), and WAN or Internet routers. Leaf switches do not connect to other leaf switches. In spine-and-leaf architecture, every leaf should connect to every spine in a full mesh.
Spine (aggregation) switches are used to connect to all leaf switches and are typically deployed at the end or middle of the row. Spine switches do not connect to other spine switches.
Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guide-c07-733228.html
A: Reach out to us here c
line con 0
line vty 0 4
login local
transport input ssh
line vty 5 15
login local
transport input ssh
NEW QUESTION: 4
in Which way does a spine and-leaf architecture allow for scalability in a network when additional access ports are required?
A. A spine switch and a leaf switch can be added with redundant connections between them
B. A leaf switch can be added with a single connection to a core spine switch.
C. A leaf switch can be added with connections to every spine switch
D. A spine switch can be added with at least 40 GB uplinks
Answer: C
Explanation:
Spine-leaf architecture is typically deployed as two layers: spines (such as an aggregation layer), and leaves (such as an access layer). Spine-leaf topologies provide high-bandwidth, low-latency, nonblocking server-to-server connectivity.
Leaf (aggregation) switches are what provide devices access to the fabric (the network of spine and leaf switches) and are typically deployed at the top of the rack. Generally, devices connect to the leaf switches. Devices can include servers, Layer 4-7 services (firewalls and load balancers), and WAN or Internet routers. Leaf switches do not connect to other leaf switches. In spine-and-leaf architecture, every leaf should connect to every spine in a full mesh.
Spine (aggregation) switches are used to connect to all leaf switches and are typically deployed at the end or middle of the row. Spine switches do not connect to other spine switches.
Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guide-c07-733228.html
line con 0
line vty 0 4
login local
transport input ssh
line vty 5 15
login local
transport input ssh
NEW QUESTION: 4
in Which way does a spine and-leaf architecture allow for scalability in a network when additional access ports are required?
A. A spine switch and a leaf switch can be added with redundant connections between them
B. A leaf switch can be added with a single connection to a core spine switch.
C. A leaf switch can be added with connections to every spine switch
D. A spine switch can be added with at least 40 GB uplinks
Answer: C
Explanation:
Spine-leaf architecture is typically deployed as two layers: spines (such as an aggregation layer), and leaves (such as an access layer). Spine-leaf topologies provide high-bandwidth, low-latency, nonblocking server-to-server connectivity.
Leaf (aggregation) switches are what provide devices access to the fabric (the network of spine and leaf switches) and are typically deployed at the top of the rack. Generally, devices connect to the leaf switches. Devices can include servers, Layer 4-7 services (firewalls and load balancers), and WAN or Internet routers. Leaf switches do not connect to other leaf switches. In spine-and-leaf architecture, every leaf should connect to every spine in a full mesh.
Spine (aggregation) switches are used to connect to all leaf switches and are typically deployed at the end or middle of the row. Spine switches do not connect to other spine switches.
Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guide-c07-733228.html
c
line con 0
line vty 0 4
login local
transport input ssh
line vty 5 15
login local
transport input ssh
NEW QUESTION: 4
in Which way does a spine and-leaf architecture allow for scalability in a network when additional access ports are required?
A. A spine switch and a leaf switch can be added with redundant connections between them
B. A leaf switch can be added with a single connection to a core spine switch.
C. A leaf switch can be added with connections to every spine switch
D. A spine switch can be added with at least 40 GB uplinks
Answer: C
Explanation:
Spine-leaf architecture is typically deployed as two layers: spines (such as an aggregation layer), and leaves (such as an access layer). Spine-leaf topologies provide high-bandwidth, low-latency, nonblocking server-to-server connectivity.
Leaf (aggregation) switches are what provide devices access to the fabric (the network of spine and leaf switches) and are typically deployed at the top of the rack. Generally, devices connect to the leaf switches. Devices can include servers, Layer 4-7 services (firewalls and load balancers), and WAN or Internet routers. Leaf switches do not connect to other leaf switches. In spine-and-leaf architecture, every leaf should connect to every spine in a full mesh.
Spine (aggregation) switches are used to connect to all leaf switches and are typically deployed at the end or middle of the row. Spine switches do not connect to other spine switches.
Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guide-c07-733228.html
In case you haven’t done it yet, we strongly advise in reviewing the below. These are important resources related to the c
line con 0
line vty 0 4
login local
transport input ssh
line vty 5 15
login local
transport input ssh
NEW QUESTION: 4
in Which way does a spine and-leaf architecture allow for scalability in a network when additional access ports are required?
A. A spine switch and a leaf switch can be added with redundant connections between them
B. A leaf switch can be added with a single connection to a core spine switch.
C. A leaf switch can be added with connections to every spine switch
D. A spine switch can be added with at least 40 GB uplinks
Answer: C
Explanation:
Spine-leaf architecture is typically deployed as two layers: spines (such as an aggregation layer), and leaves (such as an access layer). Spine-leaf topologies provide high-bandwidth, low-latency, nonblocking server-to-server connectivity.
Leaf (aggregation) switches are what provide devices access to the fabric (the network of spine and leaf switches) and are typically deployed at the top of the rack. Generally, devices connect to the leaf switches. Devices can include servers, Layer 4-7 services (firewalls and load balancers), and WAN or Internet routers. Leaf switches do not connect to other leaf switches. In spine-and-leaf architecture, every leaf should connect to every spine in a full mesh.
Spine (aggregation) switches are used to connect to all leaf switches and are typically deployed at the end or middle of the row. Spine switches do not connect to other spine switches.
Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guide-c07-733228.html
c
line con 0
line vty 0 4
login local
transport input ssh
line vty 5 15
login local
transport input ssh
NEW QUESTION: 4
in Which way does a spine and-leaf architecture allow for scalability in a network when additional access ports are required?
A. A spine switch and a leaf switch can be added with redundant connections between them
B. A leaf switch can be added with a single connection to a core spine switch.
C. A leaf switch can be added with connections to every spine switch
D. A spine switch can be added with at least 40 GB uplinks
Answer: C
Explanation:
Spine-leaf architecture is typically deployed as two layers: spines (such as an aggregation layer), and leaves (such as an access layer). Spine-leaf topologies provide high-bandwidth, low-latency, nonblocking server-to-server connectivity.
Leaf (aggregation) switches are what provide devices access to the fabric (the network of spine and leaf switches) and are typically deployed at the top of the rack. Generally, devices connect to the leaf switches. Devices can include servers, Layer 4-7 services (firewalls and load balancers), and WAN or Internet routers. Leaf switches do not connect to other leaf switches. In spine-and-leaf architecture, every leaf should connect to every spine in a full mesh.
Spine (aggregation) switches are used to connect to all leaf switches and are typically deployed at the end or middle of the row. Spine switches do not connect to other spine switches.
Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guide-c07-733228.html
Exam Topics
in Which way does a spine and-leaf architecture allow for scalability in a network when additional access ports are required?
A. A spine switch and a leaf switch can be added with redundant connections between them
B. A leaf switch can be added with a single connection to a core spine switch.
C. A leaf switch can be added with connections to every spine switch
D. A spine switch can be added with at least 40 GB uplinks
Answer: C
Explanation:
Spine-leaf architecture is typically deployed as two layers: spines (such as an aggregation layer), and leaves (such as an access layer). Spine-leaf topologies provide high-bandwidth, low-latency, nonblocking server-to-server connectivity.
Leaf (aggregation) switches are what provide devices access to the fabric (the network of spine and leaf switches) and are typically deployed at the top of the rack. Generally, devices connect to the leaf switches. Devices can include servers, Layer 4-7 services (firewalls and load balancers), and WAN or Internet routers. Leaf switches do not connect to other leaf switches. In spine-and-leaf architecture, every leaf should connect to every spine in a full mesh.
Spine (aggregation) switches are used to connect to all leaf switches and are typically deployed at the end or middle of the row. Spine switches do not connect to other spine switches.
Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guide-c07-733228.html
Review the c
line con 0
line vty 0 4
login local
transport input ssh
line vty 5 15
login local
transport input ssh
NEW QUESTION: 4
in Which way does a spine and-leaf architecture allow for scalability in a network when additional access ports are required?
A. A spine switch and a leaf switch can be added with redundant connections between them
B. A leaf switch can be added with a single connection to a core spine switch.
C. A leaf switch can be added with connections to every spine switch
D. A spine switch can be added with at least 40 GB uplinks
Answer: C
Explanation:
Spine-leaf architecture is typically deployed as two layers: spines (such as an aggregation layer), and leaves (such as an access layer). Spine-leaf topologies provide high-bandwidth, low-latency, nonblocking server-to-server connectivity.
Leaf (aggregation) switches are what provide devices access to the fabric (the network of spine and leaf switches) and are typically deployed at the top of the rack. Generally, devices connect to the leaf switches. Devices can include servers, Layer 4-7 services (firewalls and load balancers), and WAN or Internet routers. Leaf switches do not connect to other leaf switches. In spine-and-leaf architecture, every leaf should connect to every spine in a full mesh.
Spine (aggregation) switches are used to connect to all leaf switches and are typically deployed at the end or middle of the row. Spine switches do not connect to other spine switches.
Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guide-c07-733228.html
c
line con 0
line vty 0 4
login local
transport input ssh
line vty 5 15
login local
transport input ssh
NEW QUESTION: 4
in Which way does a spine and-leaf architecture allow for scalability in a network when additional access ports are required?
A. A spine switch and a leaf switch can be added with redundant connections between them
B. A leaf switch can be added with a single connection to a core spine switch.
C. A leaf switch can be added with connections to every spine switch
D. A spine switch can be added with at least 40 GB uplinks
Answer: C
Explanation:
Spine-leaf architecture is typically deployed as two layers: spines (such as an aggregation layer), and leaves (such as an access layer). Spine-leaf topologies provide high-bandwidth, low-latency, nonblocking server-to-server connectivity.
Leaf (aggregation) switches are what provide devices access to the fabric (the network of spine and leaf switches) and are typically deployed at the top of the rack. Generally, devices connect to the leaf switches. Devices can include servers, Layer 4-7 services (firewalls and load balancers), and WAN or Internet routers. Leaf switches do not connect to other leaf switches. In spine-and-leaf architecture, every leaf should connect to every spine in a full mesh.
Spine (aggregation) switches are used to connect to all leaf switches and are typically deployed at the end or middle of the row. Spine switches do not connect to other spine switches.
Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guide-c07-733228.html
Offcial Page
in Which way does a spine and-leaf architecture allow for scalability in a network when additional access ports are required?
A. A spine switch and a leaf switch can be added with redundant connections between them
B. A leaf switch can be added with a single connection to a core spine switch.
C. A leaf switch can be added with connections to every spine switch
D. A spine switch can be added with at least 40 GB uplinks
Answer: C
Explanation:
Spine-leaf architecture is typically deployed as two layers: spines (such as an aggregation layer), and leaves (such as an access layer). Spine-leaf topologies provide high-bandwidth, low-latency, nonblocking server-to-server connectivity.
Leaf (aggregation) switches are what provide devices access to the fabric (the network of spine and leaf switches) and are typically deployed at the top of the rack. Generally, devices connect to the leaf switches. Devices can include servers, Layer 4-7 services (firewalls and load balancers), and WAN or Internet routers. Leaf switches do not connect to other leaf switches. In spine-and-leaf architecture, every leaf should connect to every spine in a full mesh.
Spine (aggregation) switches are used to connect to all leaf switches and are typically deployed at the end or middle of the row. Spine switches do not connect to other spine switches.
Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guide-c07-733228.html
Review the official page for the c
line con 0
line vty 0 4
login local
transport input ssh
line vty 5 15
login local
transport input ssh
NEW QUESTION: 4
in Which way does a spine and-leaf architecture allow for scalability in a network when additional access ports are required?
A. A spine switch and a leaf switch can be added with redundant connections between them
B. A leaf switch can be added with a single connection to a core spine switch.
C. A leaf switch can be added with connections to every spine switch
D. A spine switch can be added with at least 40 GB uplinks
Answer: C
Explanation:
Spine-leaf architecture is typically deployed as two layers: spines (such as an aggregation layer), and leaves (such as an access layer). Spine-leaf topologies provide high-bandwidth, low-latency, nonblocking server-to-server connectivity.
Leaf (aggregation) switches are what provide devices access to the fabric (the network of spine and leaf switches) and are typically deployed at the top of the rack. Generally, devices connect to the leaf switches. Devices can include servers, Layer 4-7 services (firewalls and load balancers), and WAN or Internet routers. Leaf switches do not connect to other leaf switches. In spine-and-leaf architecture, every leaf should connect to every spine in a full mesh.
Spine (aggregation) switches are used to connect to all leaf switches and are typically deployed at the end or middle of the row. Spine switches do not connect to other spine switches.
Reference: https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/guide-c07-733228.html
Check what resources you have available for studying.