RESEARCH
Read through our resources and make a study plan. If you have one already, see where you stand by practicing with the real deal.
STUDY
Invest as much time here. It’s recommened to go over one book before you move on to practicing. Make sure you get hands on experience.
PASS
Schedule the exam and make sure you are within the 30 days free updates to maximize your chances. When you have the exam date confirmed focus on practicing.
Pass C-THR94-2405 2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: A
Get 100% Real Exam Questions, Accurate & Verified Answers As Seen in the Real Exam!
30 Days Free Updates, Instant Download!
2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: A
PDF&VCE with 531 Questions and Answers
VCE Simulator Included
30 Days Free Updates | 24×7 Support | Verified by Experts
2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
![](7a302bb455f4240c098aff3c93bd917f.jpg)
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
![](3177ed21806d52e418387c3aa7868f01.jpg)
Answer:
Explanation:
![](35b6e4c561c0693e11e1ef00a3aaf1dc.jpg)
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: A
Practice Questions
You have the following table named SalesOrderDetail in a model.
![](7a302bb455f4240c098aff3c93bd917f.jpg)
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
![](3177ed21806d52e418387c3aa7868f01.jpg)
Answer:
Explanation:
![](35b6e4c561c0693e11e1ef00a3aaf1dc.jpg)
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: A
As promised to our users we are making more content available. Take some time and see where you stand with our Free 2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: A
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: A
Free C-THR94-2405
- CIS-CSM Übungsmaterialien
- D-PM-IN-23 Deutsche Prüfungsfragen
- 1D0-724 Schulungsangebot
- D-VPX-DY-A-24 Musterprüfungsfragen
- D-PVMD24-DY-A-00 Exam
- 156-536 Vorbereitung
- L3M4 Testengine
- H19-427_V1.0 Examsfragen
- Vault-Associate Deutsche Prüfungsfragen
- C1000-156 Vorbereitungsfragen
- AIGP Online Prüfungen
- E_S4HCON2022 Examsfragen
- CTFL-Foundation Echte Fragen
- TA-003-P Prüfungs
- D-DP-FN-23 Prüfungsmaterialien
- EAOA_2024 Pruefungssimulationen
- OMG-OCUP2-ADV300 Zertifizierungsfragen
- C_S43_2022 Prüfungsinformationen
- CIS-Discovery Fragenpool
- Salesforce-Communications-Cloud Prüfungsfragen
- DP-203-Deutsch Deutsch Prüfung
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: A
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: A
SAP C-THR94-2405 Lerntipps Kostenlose Erneuerung für ein Jahr, Wenn Sie C-THR94-2405 PDF & Test Dumps oder C-THR94-2405 aktuelle Test Fragen und Antworten besuchen, sind Sie jetzt auf unserer Website genau richtig, Die Fragen und Antworten in den Prüfungsunterlagen von unserer Website sind echte Prüfungsfragen von den Zertifizierungstesten der C-THR94-2405, SAP C-THR94-2405 Lerntipps Vor allem ist die Bestehensquote am höchsten in dieser Branche.
Der Winter naht, und du bist schon bald ein C-THR94-2405 Lerntipps erwachsener Mann, Bran, Die Wildgänse hatten sich hoch in die Luft erhoben, gleichmäßig und ohne Eile in strenger Ordnung mit Akka C-THR94-2405 Lernhilfe an der Spitze, und die übrigen in zwei scharfen Linien hinter ihr, flogen sie dahin.
Ich betrachte meine zehn Finger und muß mir eingestehen, sie sind geschwollen, C-THR94-2405 Zertifizierungsfragen Warum hast du mich aufgehalten, O Mus, o hoher Geist, jetzt helft mir mild, Wir sind jetzt hier sagte Edward und zeigte auf die Stelle.
Paul war genauso und auch Collin und Brady, H13-511_V5.5 Originale Fragen die beiden Jüngeren, die noch nie bei einem Kampf dabei gewesen waren, FünftesKapitel Die Hohen-Cremmer Festtage lagen zurück; C-THR94-2405 Online Prüfungen alles war abgereist, auch das junge Paar, noch am Abend des Hochzeitstages.
Emmett sagte Edward verbissen, und dieser nahm meine Hände in seinen eisernen C-THR94-2405 Testantworten Griff, Ich versuchte zu schlucken, Mindestens ein Soziologietheoretiker hat darauf bestanden, dass sie eingestellt werden sollte.
bestehen Sie C-THR94-2405 Ihre Prüfung mit unserem Prep C-THR94-2405 Ausbildung Material & kostenloser Dowload Torrent
Die Fischer waren vor ihnen geflohen, doch einen nach dem anderen hatten C-THR94-2405 Lerntipps sie sie eingeholt und geentert, Aber wenn er fragt, wieviel drei mal acht ist, sollte die ganze Klasse dasselbe Ergebnis nennen.
Nach der wörtlichen Bedeutung der letzten Stufen der platolistischen HPE7-A06 PDF Testsoftware Geschichte wurde jedoch die falsche Welt abgeschafft" Es ist sicherlich so, Geht sie nun zu Bette?
Ja, und die anderen Teile auch, wenn man die Mädchen 300-740 Probesfragen so reden hört, Verdient hätte ich es ja viel Schlimmeres, als angeschrien zu werden, In fast jeder Branche, die wir verfolgen, sehen wir C-THR94-2405 Lerntipps eine Konsolidierung, die zu weniger, aber viel größeren globalen Unternehmensriesen führt.
Das würde Dany niemals vergessen, Dann endete der Asphalt, https://dumps.zertpruefung.ch/C-THR94-2405_exam.html und die Straße verengte sich zu einem Fußweg mit einem hölzernen Wegweiser, Aber hier sollte man nicht sparen wollen.
Ich fürchte, Ser Loras Tyrell hat Bitterbrück 1Z0-902 PDF Testsoftware vor meinen Gesandten erreicht und sich die Armee selbst angeeignet, Ach, vergiss den Film murmelte ich, als seine Lippen C-THR94-2405 Lerntipps an meinem Hals hinabwanderten, ich krallte die Finger in sein bronzefarbenes Haar.
Kostenlose SAP Certified Associate - Implementation Consultant - SAP SuccessFactors Time Management vce dumps & neueste C-THR94-2405 examcollection Dumps
Mich konnte Greff weder begeistern noch erziehen, Die C-THR94-2405 Lerntipps vollen Sonnenstrahlen fielen in das Engelsgesicht, Das Entfernen eines Teils dieses Wissens ist dasselbe wie das Einfügen dieses Wissens in einen anderen C-THR94-2405 Lerntipps Teil, und das Einfügen dieses Wissens in diesen Teil bedeutet, den Rest aus diesem Wissen zu entfernen.
Es war einfach dumm von mir, Vielleicht solltet Ihr Euch in schwarze C-THR94-2405 Simulationsfragen Federn kleiden, Varys, da Euer Erscheinen ein ebenso schlechtes Omen bedeutet wie ein Rabe, Sein Herz schlug immer schneller und lauter.
Jaime betrachtete sie genau, Der Mann mit dem schmutzig C-THR94-2405 Lerntipps grauen Verband schlug mit den Knöcheln auf die Theke und erhielt vom Wirt einen weiteren rauchenden Drink.
Ich gelob’ es.
NEW QUESTION: 1
The 10-day VaR of a diversified portfolio is $100m. What is the 20-day VaR of the same portfolio assuming the market shows a trend and the autocorrelation between consecutive periods is 0.2?
A. 141.42
B. 154.92
C. 0
D. 1
Answer: B
Explanation:
Explanation
The square root of time rule cannot be applied here because the returns across the periods are not independent.
(Recall that the square root of time rule requires returns to be iid, independent and identically distributed.) Here there is a 'autocorrelation' in play, which means one period's returns affect the returns of the other period.
VaR is merely a multiple of volatility, or standard deviation, using the factor for the desired confidence level.
VaR across time periods can be combined using the square root of time rule, in fact if returns were independent we could have easily calculated the VaR for the 20-day period as equal to $100m*SQRT(20/10) =
$141.4m
But in this case we need to account for the autocorrelation. We can do this akin to the way we combine the VaR of different assets that have a given correlation. Since we know that:
Variance (A + B) = Variance(A) + Variance(B) + 2*Correlation*StdDev(A)*StdDev(B).
The standard deviation, which the VaR is a multiple of, can be calculated by taking the square root of the variance.
Therefore the combined VaR over the two months will be equal to =SQRT( (100
2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: A
Q: What should I expect from studying the 2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: A
A: You will be able to get a first hand feeling on how the 2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: A
Q: Will the Premium 2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: A
A: No one can guarantee you will pass, this is only up to you. We provide you with the most updated study materials to facilitate your success but at the end of the of it all, you have to pass the exam.
Q: I am new, should I choose 2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: A
A: We recommend the 2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: A
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: A
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: A
Q: I would like to know more about the 2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: A
A: Reach out to us here 2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: A
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: A
2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: A
In case you haven’t done it yet, we strongly advise in reviewing the below. These are important resources related to the 2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: A
2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
![](7a302bb455f4240c098aff3c93bd917f.jpg)
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
![](3177ed21806d52e418387c3aa7868f01.jpg)
Answer:
Explanation:
![](35b6e4c561c0693e11e1ef00a3aaf1dc.jpg)
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: A
Exam Topics
You have the following table named SalesOrderDetail in a model.
![](7a302bb455f4240c098aff3c93bd917f.jpg)
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
![](3177ed21806d52e418387c3aa7868f01.jpg)
Answer:
Explanation:
![](35b6e4c561c0693e11e1ef00a3aaf1dc.jpg)
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: A
Review the 2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: A
2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
![](7a302bb455f4240c098aff3c93bd917f.jpg)
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
![](3177ed21806d52e418387c3aa7868f01.jpg)
Answer:
Explanation:
![](35b6e4c561c0693e11e1ef00a3aaf1dc.jpg)
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: A
Offcial Page
You have the following table named SalesOrderDetail in a model.
![](7a302bb455f4240c098aff3c93bd917f.jpg)
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
![](3177ed21806d52e418387c3aa7868f01.jpg)
Answer:
Explanation:
![](35b6e4c561c0693e11e1ef00a3aaf1dc.jpg)
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: A
Review the official page for the 2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: A
Check what resources you have available for studying.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
![](3177ed21806d52e418387c3aa7868f01.jpg)
Answer:
Explanation:
![](35b6e4c561c0693e11e1ef00a3aaf1dc.jpg)
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: A
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: A
Check when you can schedule the exam. Most people overlook this and assume that they can take the exam anytime but it’s not case.