RESEARCH
Read through our resources and make a study plan. If you have one already, see where you stand by practicing with the real deal.
STUDY
Invest as much time here. It’s recommened to go over one book before you move on to practicing. Make sure you get hands on experience.
PASS
Schedule the exam and make sure you are within the 30 days free updates to maximize your chances. When you have the exam date confirmed focus on practicing.
Pass 700-240 2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: B
Get 100% Real Exam Questions, Accurate & Verified Answers As Seen in the Real Exam!
30 Days Free Updates, Instant Download!
2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: B
PDF&VCE with 531 Questions and Answers
VCE Simulator Included
30 Days Free Updates | 24×7 Support | Verified by Experts
2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
![](7a302bb455f4240c098aff3c93bd917f.jpg)
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
![](3177ed21806d52e418387c3aa7868f01.jpg)
Answer:
Explanation:
![](35b6e4c561c0693e11e1ef00a3aaf1dc.jpg)
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: B
Practice Questions
You have the following table named SalesOrderDetail in a model.
![](7a302bb455f4240c098aff3c93bd917f.jpg)
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
![](3177ed21806d52e418387c3aa7868f01.jpg)
Answer:
Explanation:
![](35b6e4c561c0693e11e1ef00a3aaf1dc.jpg)
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: B
As promised to our users we are making more content available. Take some time and see where you stand with our Free 2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: B
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: B
Free 700-240
- UiPath-ABAv1 Verified Answers
- Guaranteed HPE7-A06 Success
- PCCET Reliable Exam Preparation
- H13-624_V5.5 Reliable Exam Syllabus
- C_SACS_2316 Exam Collection
- Reliable CIS-Discovery Braindumps Book
- JN0-664 Test Topics Pdf
- CMQ-OE Examcollection Free Dumps
- FC0-U61 Reliable Test Cost
- 156-582 Reliable Test Book
- Original H13-611_V4.5 Questions
- Latest NS0-521 Practice Questions
- 1z0-1058-22 Valid Exam Braindumps
- NCP-CI-AWS Test Result
- PCCET Latest Exam Pattern
- H21-611_V1.0 Certification Test Answers
- C_S4FTR_2023 Latest Test Materials
- NSE7_LED-7.0 Study Materials
- AZ-304 Dumps Collection
- Valid CCZT Test Answers
- Valid Braindumps CCST-Networking Ebook
- 300-610 Exam Dumps
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: B
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: B
700-240 learning material always regards helping students to pass the exam as it is own mission, That is why I would recommend it to all the candidates attempting the 700-240 exam to use 700-240 exam preparation materials, Cisco 700-240 New Study Plan I think this way to study is acceptable by many people, Cisco 700-240 New Study Plan To master the knowledge of the exam, many people immersed themselves into the ocean of the exam knowledge, harvesting nothing but fatigue and tiresome.
Charlie Brown, of course, In stop motion, a grab point is a https://freetorrent.dumpstests.com/700-240-latest-test-dumps.html hard point on a clay character that allows the animator to grab and move a joint without seriously deforming the clay.
Yes, you can choose from predesigned templates and upload your own images, New 700-240 Study Plan Published by Rui Dou Fukatsu Publishing Co, To quote Miguel de Cervantes from his wonderful novel Don Quixote, Forewarned, forearmed;
As previously mentioned, Frame Relay uses virtual circuits to create New 700-240 Study Plan a communication channel, These infrastructures should help the operations staff answer the following questions: Am I under attack?
The reality is when a new entrant offers a better customer solution its likely New 700-240 Study Plan they will eventually overcome political and regulatory roadblocks and win in the marketplace.We think this will be the case for most sharing economy firms.
700-240 download pdf dumps & 700-240 latest training material & 700-240 exam prep study
Key storage device: private config, Exam 700-240 braindumps is another superb offer of Pulsarhealthcare.com that is particularly helpful for those who want to the point and the most relevant content to pass exam.
Because FX traders are exchanging agreements with APM-PFQ Valid Test Sample each other, rather than the actual underlying assets, there is no need to own" anything before selling, Communities expect companies to pay fair wages, Exam Dumps C-LIXEA-2404 Collection pay fair taxes and dispose of hazardous materials or waste in an environmentally friendly manner.
When you select imported bitmap, the Property HPE6-A85 Valid Test Discount inspector indicates that you have selected a bitmap, Pulsarhealthcare provides the latest Cisco Cisco Specialist exam questions New 700-240 Study Plan and answers in the most convenient exam PDF files and exam VCE simulators.
More on what this is all about later, Social media practitioners are the human link between a company and its customers, 700-240 learning material always regards helping students to pass the exam as it is own mission.
That is why I would recommend it to all the candidates attempting the 700-240 exam to use 700-240 exam preparation materials, I think this way to study is acceptable by many people.
Realistic Cisco 700-240 New Study Plan Pass Guaranteed
To master the knowledge of the exam, many people immersed themselves into the ocean of the exam knowledge, harvesting nothing but fatigue and tiresome, Use our 700-240 quiz prep.
We have made all efforts to update our product in order to help you deal with any change, making you confidently take part in the exam, Pulsarhealthcare Cisco 700-240 dumps provides you everything you will need to take a Cisco 700-240 exam Details are researched and produced by Pulsarhealthcare Certification Experts who are constantly using industry experience to produce precise, and logical.
With our 700-240 practice guide, your success is 100% guaranteed, You can have a quick revision of the 700-240 Pulsarhealthcare study materials in your spare time.
Our Cisco Environmental Sustainability Overview exam study material received thousands of favorable receptions New 700-240 Study Plan since appeared on the market, Request It, Find the same core area exam questions with professionally verified answers, and PASS YOUR EXAM.
Here our 700-240 VCE dumps come, with its brand-new ways of learning, which can put the upset candidates out of the heavy and suffering works, Moreover, you actually only need to download the APP online for the first time and then you can have free access to our 700-240 exam questions in the offline condition if you don’t clear cache.
Many IT workers try to be a leader in this area by means of passing exams and get a Cisco certification, 700-240 exam dumps can help you to overcome the difficult - from understanding New C-S4CPR-2402 Practice Questions the necessary educational requirements to passing the Cisco Specialist Cisco Environmental Sustainability Overview exam test.
NEW QUESTION: 1
The 10-day VaR of a diversified portfolio is $100m. What is the 20-day VaR of the same portfolio assuming the market shows a trend and the autocorrelation between consecutive periods is 0.2?
A. 141.42
B. 154.92
C. 0
D. 1
Answer: B
Explanation:
Explanation
The square root of time rule cannot be applied here because the returns across the periods are not independent.
(Recall that the square root of time rule requires returns to be iid, independent and identically distributed.) Here there is a 'autocorrelation' in play, which means one period's returns affect the returns of the other period.
VaR is merely a multiple of volatility, or standard deviation, using the factor for the desired confidence level.
VaR across time periods can be combined using the square root of time rule, in fact if returns were independent we could have easily calculated the VaR for the 20-day period as equal to $100m*SQRT(20/10) =
$141.4m
But in this case we need to account for the autocorrelation. We can do this akin to the way we combine the VaR of different assets that have a given correlation. Since we know that:
Variance (A + B) = Variance(A) + Variance(B) + 2*Correlation*StdDev(A)*StdDev(B).
The standard deviation, which the VaR is a multiple of, can be calculated by taking the square root of the variance.
Therefore the combined VaR over the two months will be equal to =SQRT( (100
2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: B
Q: What should I expect from studying the 2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: B
A: You will be able to get a first hand feeling on how the 2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: B
Q: Will the Premium 2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: B
A: No one can guarantee you will pass, this is only up to you. We provide you with the most updated study materials to facilitate your success but at the end of the of it all, you have to pass the exam.
Q: I am new, should I choose 2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: B
A: We recommend the 2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: B
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: B
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: B
Q: I would like to know more about the 2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: B
A: Reach out to us here 2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: B
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: B
2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: B
In case you haven’t done it yet, we strongly advise in reviewing the below. These are important resources related to the 2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: B
2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
![](7a302bb455f4240c098aff3c93bd917f.jpg)
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
![](3177ed21806d52e418387c3aa7868f01.jpg)
Answer:
Explanation:
![](35b6e4c561c0693e11e1ef00a3aaf1dc.jpg)
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: B
Exam Topics
You have the following table named SalesOrderDetail in a model.
![](7a302bb455f4240c098aff3c93bd917f.jpg)
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
![](3177ed21806d52e418387c3aa7868f01.jpg)
Answer:
Explanation:
![](35b6e4c561c0693e11e1ef00a3aaf1dc.jpg)
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: B
Review the 2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: B
2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
![](7a302bb455f4240c098aff3c93bd917f.jpg)
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
![](3177ed21806d52e418387c3aa7868f01.jpg)
Answer:
Explanation:
![](35b6e4c561c0693e11e1ef00a3aaf1dc.jpg)
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: B
Offcial Page
You have the following table named SalesOrderDetail in a model.
![](7a302bb455f4240c098aff3c93bd917f.jpg)
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
![](3177ed21806d52e418387c3aa7868f01.jpg)
Answer:
Explanation:
![](35b6e4c561c0693e11e1ef00a3aaf1dc.jpg)
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: B
Review the official page for the 2) +
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: B
Check what resources you have available for studying.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
![](3177ed21806d52e418387c3aa7868f01.jpg)
Answer:
Explanation:
![](35b6e4c561c0693e11e1ef00a3aaf1dc.jpg)
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: B
2*0.2*100*100 )= $154.92m. All other answers are incorrect.
NEW QUESTION: 2
You have the following table named SalesOrderDetail in a model.
You need to calculate the sum of SalesTotal for all the rows that have a quantity greater than 1.
How should you complete the DAX formula? To answer, drag the appropriate values to the correct targets.
Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
CALCULATE(SUMX('SalesOrdersDetail'[SalesTotal]),'SalesOrderDetail'[Quantity] > 1)
NEW QUESTION: 3
Which SnapMirror relationship should you create in the snapmirror.conf file for a SnapManager for Exchange configuration?
A. filer1:vol1 filer2:vol1 - - - -
B. filer1:vol1 filer2:vol1 * * * * *
C. filer1:vol1 filer2:vol1 - * * * *
D. filer1:vol1 filer2:vol1 - 15,30 * * *
Answer: A
NEW QUESTION: 4
Using the CUSTOMERStable, you need to generate a report that shows 50% of each credit amount in each income level. The report should NOT show any repeated credit amounts in each income level.
Which query would give the required result?
A. SELECT DISTINCT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
B. SELECT DISTINCT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
C. SELECT cust_income_level, DISTINCT cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers
D. SELECT cust_income_level || ' ' || cust_credit_limit * 0.50 AS "50% Credit Limit" FROM customers.
Answer: B
Check when you can schedule the exam. Most people overlook this and assume that they can take the exam anytime but it’s not case.